
lang=en
author=Tim Niemueller <tim@niemueller.de>
module_author=Tim Niemueller <tim@niemueller.de>
homepage=http://www.niemueller.de/webmin/modules/freeswan/
copyright=(C) 2000-2001 by Tim Niemueller <tim@niemueller.de>
license=GPL

index_title=FreeS/WAN VPN
index_ifaces=Interfaces
index_loadconn=Connections on start
index_pluto=Pluto IKE
index_debug=Debug & Log
index_defaultc=Connection Defaults
index_status=Connection Status
index_info=FreeS/WAN Info
index_conns=Connections
index_noconn=No connections found
index_keys=Keys
index_newconn=Add Connection

eifcs_title=Edit Interfaces
eifcs_heading=Exit interface mappings
eifcs_return=module index
eifcs_name=Interface
eifcs_mapto=Map to
eifcs_defrt=Default Route Interface as ipsec0
eifcs_below=As mapped below

edebug_title=Debug & Log
edebug_klipsdebug=KLIPS Debug
edebug_all=All
edebug_none=None
edebug_listed=Listed..
edebug_plutodebug=Pluto Debug
edebug_syslog=Syslog settings for startup/shutdown messages
edebug_syslfac=Facility
edebug_syslpri=Priority
edebug_coredump=Core dump settings for programs started by ipsec
edebug_nocore=No core dumps
edebug_docore=To directory

vinfo_title=View Info
vinfo_return=module index

epluto_title=Pluto Settings
epluto_heading=Edit Pluto parameters
epluto_run=Run Pluto?
epluto_wait=Wait for negotiation attempt before starting next?
epluto_bg=Load and start connections in background?
epluto_pre=Pre Pluto Command
epluto_post=Post Pluto Command
epluto_return=module index

econn_err=Failed to edit connection
econn_err_mis=No connection given
econn_title=Edit Connection
econn_newtitle=New Connection
econn_general=General Settings for
econn_name=Name
econn_type=Type
econn_type_tunnel=Tunnel
econn_type_transport=Transport
econn_type_passthrough=Passthrough
econn_auto=On Startup
econn_auto_ignore=Ignore
econn_auto_add=Load/Add
econn_auto_start=Start
econn_compress=Compress
econn_left=Settings for left side
econn_right=Settings for right side
econn_ip=IP Address
econn_sub=Subnet
econn_gate=Next Gateway
econn_updown=Up/Down Script
econn_fw=Firewall
econn_return=module index
econn_eak=Edit Auto Keying Settings
econn_emk=Edit Manual Keying Settings
econn_savefirst=To edit keying settings first save the basic connection.
econn_newconn=new connection

eak_title=Auto Keying Settings
eak_autokey=Parameters for automatic keying for <I>$1</I>
eak_keyex=Key Exchange Method
eak_perffor=Perfect Forward Secrecy
eak_auth=Authentication protocol
eak_authby=Authentication method
eak_leftid=Left Host's ID
eak_rightid=Right Host's ID
eak_leftidauto=Left IP
eak_rightidauto=Right IP
eak_leftrsa=Left RSA public key
eak_none=None
eak_dns=From DNS
eak_rightrsa=Right RSA public key
eak_keylife=Key Lifetime
eak_rekeymargin=Rekeying Margin
eak_rekeyfuzz=Increase Factor for Margin
eak_keyingtries=No. of Keying Tries
eak_ikelifetime=IKE Connection Lifetime
eak_return=edit connection '<I>$1</I>'

emk_title=Manual Keying Settings
emk_mankey=Parameters for manual keying for <I>$1</I>
emk_spi=Security Parameter Index
emk_spibase=SPI Base
emk_esp=ESP Encryption/Authentication
emk_ah=AH Authentication
emk_espenckey=ESP Encryption Key
emk_auto=Automatic
emk_espauthkey=ESP Authentication Key
emk_ahauthkey=AH Authentication Key
emk_ahrwin=AH Replay Window
emk_left=Left Settings
emk_right=Right Settings
emk_espspi=ESP SPI
emk_ahspi=AH SPI
emk_ipssec=None/From ipsec.secrets
emk_none=None
emk_espnone=None
emk_ahnone=None

estart_title=IPSec Start
estart_load=Connections to be <I>loaded</I> on IPSec startup
estart_start=Connections to be <I>started</I> on IPSec startup
estart_search=As defined for connections
estart_below=As listed below
estart_none=None
estart_return=module index

lib_err=Failed to load FreeS/WAN IPSsec Configuration Webmin Module
lib_err_nosupport=It seems that your system does not support FreeS/WAN IPSEC
lib_err_syn=Invalid section name '$1' in line $2
lib_noifc=Not enabled
lib_err_nocomm=Cannot find the ipsec command. Please define it in the $1.
lib_modconf=Module Configuration

sifcs_nodef=You selected to define the interfaces yourself but you did not define any.

sdebug_nocoredir=You choose to have core dumps but not where to store them
sdebug_invcall=Invalid Call of save_debug. Aborting!
sdebug_klipsdebug=You choose to select options for debugging of KLIPS but you didn't choose any.
sdebug_plutodebug=You choose to select options for debugging of Pluto but you didn't choose any.

sconn_nof=The connection '$1' could not been found.
sconn_invname=Invalid name for connections. Name may only contain letters, digits, periods, underscores, and hyphens and must start with a letter.

smk_noespenc=You have chosen automatic key generation for ESP Encryption. But you did choose not to use ESP.
smk_noespauth=You have chosen automatic key generation for ESP Authentication. But you did choose not to use ESP Authentication.
smk_noah=You have chosen automatic key generation for AH. But you did choose not to use AH.

vstat_title=View Status
vstat_return=module index

lkeys_title=List Keys
lkeys_return=module index

sstart_noload=You chose to <I>load</I> the connections you defined. But you did not select any!
sstart_nostart=You chose to <I>start</I> the connections you defined. But you did not select any!
