Connect
Disconnect
Setup GPRS Easy Connect
Exit
Select the type of your handset\n(Setup menu)
Important
After the starting...
Select the port
OK/Save Data
Setup GPRS Easy Connect***
Error (GPRS Easy Connect)
\nAfter the successfull connection...
Start this browser\nafter the successfull connection:
Turn this function on.
Iconify the connection window.
Important (GPRS Easy Connect)
Automatic connection.
Can't find the configuration file!\nCheck your setting!
Remove of statistics data
Connecting in progress...
Error in connection
The connection is blocked by***\nprocess using the resource.
The connection is interrupted due to dialing\ntime limit.Please reset yout handset.
Perhaps you did not switch on your mobile,\ndid you?
Successful connection!
Successful connection.\nYour local IP address: ***\nYour remote IP adress: ***\nPrimary DNS server: ***\nSecondary DNS server: ***
Connection interrupted.\nNo network answer!
Total data downloaded with GPRS Easy Connect
Total data uploaded with GPRS Easy Connect
Total data transmitted
Bytes downloaded
Bytes uploaded
Packets downloaded
Packets uploaded
The average speed of the active connection
Duration of active connection
Duration of total connections
Speed of current download
Speed of current upload
Connection interrupted.\nThe GPRS network is overloaded.
Connection interrupted due to\nconfiguration error.\nVerify settings.
Connection interrupted by user.\nFlat battery.\nData cable failure.
Connection interrupted.
Special statistics (GPRS Easy Connect)
Without supplement of data
With supplement of data
Lines
Columns
Average speed of the active connection per 5 minutes.\nAnd average of those.
Show/hide the statistics window.
Diagram
Connecting process failed\nfor outer error.\nYou should reset your phone.
hour
Select your language!
Time to left untill re-connect:
Re-connect
Cancel
Can't find running net protocoll\nNo usable GPRS service!
Iconify the GPRS Easy Connect
You can't run more than one of\nGPRS Easy Connect!
Choose your supplier!
No file named apn!
User:
Password:
Read the important information! (Under "Other" menu.)
No find the setup file!\nCheck your settings!
You're not authorized for use the pppd!\nRead the FAQ or imortant information!
Made by
Missing setup parameters!
No selected phone!
No selected port!
Unknown language!
No selected provider!
Select the type of your handset
Obligatory parameters
Optional parameters
Time interval of watching the connection (ms)
Is the dynamic DNS allowed?
Rare parameters in use
Default
Setting of provider's own CID
Other
Close this window
Begining of the data's save
Missing configurating parameters!\nCheck your settings!
For the static DNS\nyou must be root!
Ask your privider!
History
Disable the bell signals
Re-connect in the backround
Error
Too many reconnects happend!\nYou should reset your phone.
OK
How many trial is allowed for reconnect?
Disable the CGQ commands.
Last setup chance if the connecting process fails.\nSome distributions needs it (e.g: RedHat).
Some providers needs this special parameter.\nYou should ask about it your provider!
Mostly you must to fill it in.\nIt's your provider's own parameter\nYou should ask about it your provider!
It should be your provider's generally parameter or your individual code.\nAsk your provider!
If you would like to use static DNS.

In some case it can make a more stabil connecting.
After the successfull connection the selected\nbrowser will automaticly starts.\nIf that isn't on you computer then\nthe GPRS Easy Connect will close!
If the "reconnect" option is active\n then GPRS Easy Connect will reconnect in the backround.\nYou will be seeing a countdown on your panel during reconnect.

You can give an other calling number.
Some providers need they own calling number.\nAsk about it your provider.
If you don't see your phone in the supperted phones list, try to select a similar phone.\nProbably it will work. In this case, please, inform us!
Transmitted data
Transmitted data in last 7 days
Watching of limits
Date of erase
Max. mounthly data transmission (GB)
Max. weekly data transmission (MB)
If these option is active, then the program will\nautomaticly erase the data transmission counter on the selected day.\n(If the transmitted data quantity will be reached\nthe 90% of limits, then the program will remind you!)
If the weekly limit is defined then the\nprogram will remind you when your transmitted\ndata quantity approaches that!
You have used your mounthly limit's 90% up!
You have used your weakly limit's 90% up!
Options of erase
Reset mounthly transmitted data
Reset weakly transmitted data
Reset the "5 minutes" data
Reset the time counter
There's no echo from connecting progress.\nThere're a lot of cases of it! (Try to reset your phone\nor reconfig your settings!)
The program tries to kill a frozen process. One moment please...
Settings for professionals
Disable self-authentication.
Setting of the pppd script
Do not require the peer to authenticate itself. This option requires root privilege.\n(Usually it needs by using Debian.)
Debug mode on
The /usr/local/GPRS_Easy_Connect/log/conn.log file will be made in a debug mode.\nIf your connect will not build up then please send us this file in your "Bugreport"!
Enable BCD Compress
Request that the peer compress packets that it sends, using the BSD-Compress scheme and agree to compress packets sent to the peer.\nIt's a real time comression function for data transmission!\nWARNING! IF YOU USE IT YOUR CONNECTION WILL BE ALWAYS SENDING AND RECIVING DATA FROM/TO THE SERVER\nEVEN THERE'S NO VALID DATA TRANSMISSION.\n(It's useful if you want to down(up)load a larger file. Don't forget about your limit(s) if you have that(those) using this funtion!\nSo you should turn off this function after the down(up)load!\nNote: While this funtion is active the conn.log file will be growing countinuously.)
