Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: ahcpd_0.53-r3_powerpc64_e5500.ipk
Size: 26146
SHA256sum: 8730c88609ea1d6eceb36a82eef089458a1b080c4a1f56b34d9bf620cb37ea07
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 143360
Filename: alfred_2024.3-r1_powerpc64_e5500.ipk
Size: 29907
SHA256sum: 7641a0a0ad95ea953e60005496cb46e49ee91feb12481462f03482bec31b42c5
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_powerpc64_e5500.ipk
Size: 5156
SHA256sum: 5759a6bef1ae15a9e34487fad4f0ae71b221fa07d99b8d8d861ed8460458b474
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: powerpc64_e5500
Installed-Size: 215040
Filename: babeld_1.13.1-r2_powerpc64_e5500.ipk
Size: 75998
SHA256sum: 39d3f85edc0ab3141456ca1119ae039523ced0801f6b6ab1d74964a328278c4e
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 204800
Filename: batctl-default_2024.3-r1_powerpc64_e5500.ipk
Size: 50398
SHA256sum: d0ed53782cf2daeab215f1721da8a4431b62dfb883aafa884ad7ceb1f748e709
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 204800
Filename: batctl-full_2024.3-r1_powerpc64_e5500.ipk
Size: 58012
SHA256sum: 6fbb04530e6d0a7ae2d6fd45ebdf78866cb2607f10373e106fc57a718a4b1db7
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_powerpc64_e5500.ipk
Size: 17796
SHA256sum: eac6fddfb5acbad4034a150c1fd23c1499d6e0be4b9a724bc60e5edbdf255894
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 215040
Filename: batmand_1440-r1_powerpc64_e5500.ipk
Size: 48403
SHA256sum: 6acec699fcc91e01087d522e09806cb0a89605a7403c1c3f0863a8f40b497840
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc64_e5500
Installed-Size: 1331200
Filename: bird2_2.15.1-r1_powerpc64_e5500.ipk
Size: 449286
SHA256sum: f8ea11c1c4b49ab909f5def67ef8c55c01c9b4fb989e7885dbc3bb394ccffda1
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: bird2c_2.15.1-r1_powerpc64_e5500.ipk
Size: 11366
SHA256sum: d9e55d590d2f5b23f2bf8e1be31e5d29054fe661dc3b89af590cee3f3da1fa82
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: bird2cl_2.15.1-r1_powerpc64_e5500.ipk
Size: 9898
SHA256sum: 32c4992c160b7c92ac5b6604472747d22862980b6b6194a61d282d0293a770f1
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_powerpc64_e5500.ipk
Size: 5250
SHA256sum: bb5d912bbc08d8287cfba574e7263e1a72e1424ee1aaf4fcc71dd4afb590df36
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_powerpc64_e5500.ipk
Size: 9258
SHA256sum: 1c2c7a9d04f0750a488a83a68da8d0133a5849ab674bb149402c0af11df8470a
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_powerpc64_e5500.ipk
Size: 6834
SHA256sum: cbf84e4e5746d0f0b1c629ef2031e27618ec25ed9c3adc789bb9b38fccdf7c99
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_powerpc64_e5500.ipk
Size: 11401
SHA256sum: b87883f1200f4de08960375babeeb7a66d635cc2ce94452d8f7821e8121752a7
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_powerpc64_e5500.ipk
Size: 6354
SHA256sum: 7db5d4c02b175d21a22b2bb5f8b96f3223a3d85143e245c26597f853b32ab977
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 143360
Filename: bmx7-tun_r2024061001-r1_powerpc64_e5500.ipk
Size: 28360
SHA256sum: 1cf0d2c01ea8dfd2110807b2eb1d01815da994c39d3c9998503177f5297b8427
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_powerpc64_e5500.ipk
Size: 9631
SHA256sum: 55ee9dfda57f40b1b68bdef1691cf12c02110ba42f817a924cfa7cac9b53892f
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc64_e5500
Installed-Size: 563200
Filename: bmx7_r2024061001-r1_powerpc64_e5500.ipk
Size: 191854
SHA256sum: 92dbbf0a1fd592a2f54b73fc20d8125fc5f940aa597c92fef27442503ada339a
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: powerpc64_e5500
Installed-Size: 962560
Filename: cjdns-tests_21.1-r6_powerpc64_e5500.ipk
Size: 346811
SHA256sum: 755475ea1729b4e135bbbf7edf1ec704c67213c4f98d3b90f35f46829b1dcdeb
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: powerpc64_e5500
Installed-Size: 1126400
Filename: cjdns_21.1-r6_powerpc64_e5500.ipk
Size: 400059
SHA256sum: 6ea307262b903265c8a3f3ba01f72dc90d9166f15032aa075f4c742d6bd3d1b8
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc64_e5500
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 1425
SHA256sum: 5f3abd98c2d31290418474b5def703f6f98efb6d795d46b155094123e90d597b
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc64_e5500
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 962
SHA256sum: c9a5a3c70db53cddb83a3c7e8319350174c0eb1ee39d912f9e19d3fe5f7c7373
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc64_e5500
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 953
SHA256sum: 57c19d80a8d0a88cecd7bafba36f1c885e52d0cd8c66c382e068e294187ed442
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc64_e5500
Installed-Size: 368640
Filename: hnetd-nossl_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 112652
SHA256sum: d3858532f1f7cac7541e8f527f3d8b2b71e26451728af5aff31a5f0a26e5f26a
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc64_e5500
Installed-Size: 368640
Filename: hnetd-openssl_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 124633
SHA256sum: b16a3ac93c809d68149798e17778437e07d77c0ffa91292d3cbfdcc1c48d5f9d
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: powerpc64_e5500
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_powerpc64_e5500.ipk
Size: 6593
SHA256sum: 8f66c960332fe76645b7821166521bae3f4d248219d530360faf5a6c7fdec0d5
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: powerpc64_e5500
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_powerpc64_e5500.ipk
Size: 57621
SHA256sum: c2cc71abb668c0b29399f4711ae31fc2376f8dd646deaff82cf87e56614e4689
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7783
SHA256sum: 45396eec128b51dbf2cce4ef4e75c5ca52ad48081beccca89d280646078a875d
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: ce5ac802cf56ecb81de77106fb70632fcfffa643368293ac7286b1f2283de60e
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_powerpc64_e5500.ipk
Size: 8471
SHA256sum: f0e1025764480c2ccfe5d329674ba41da53eee512776080e6ed2591c851d8b5e
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2852
SHA256sum: 3aa1a6b591ce1d7e6d68ae27918c99930a85b70044e59c333cd610f4ce5edc2e
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: powerpc64_e5500
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_powerpc64_e5500.ipk
Size: 35955
SHA256sum: cf5bbdbc398a72c34d35551791f473c369cdfc41f4fa73b51290442e5017666e
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: powerpc64_e5500
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_powerpc64_e5500.ipk
Size: 51877
SHA256sum: a2c97cb4fec428945c2bb62891fe7e1fe8d470d714c237d8a90f983d4caf0985
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_powerpc64_e5500.ipk
Size: 13510
SHA256sum: 18f905393275ab03e18013ef81fb073493009e594bb063554059f31561c1104c
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 3161
SHA256sum: 84e05da79838bffc01cf876313feccaeef4fceac0a2a14bd93ceba9efc110ba4
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 14753
SHA256sum: c773639b3f3eb671c9fda5e2b943cc3216f39cb1e5d891bb8835ae6cae224191
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 5229
SHA256sum: dcd1c8d5cd21e84ccad8e9604506706df60bd25a778c939b1e09a67621432a1c
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 3580
SHA256sum: 6f4a1e685d7dcd4170afa0fb538cf366ef169656c59a52eb7381ce83b8a7d354
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 5517
SHA256sum: 6f632c14058b0dfa30904039c8d4e9838fcb75fc61f0ea11dcd1fddfa85bda69
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 3886
SHA256sum: 99b754cf2ed8c4123d69128f66ccc5d94b32cb8662dc6252ed80191a3f2bc949
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 32093
SHA256sum: 193439967973be040ead4f1a94b2d0021ee4bd211d90a74f2026d423e4fe6497
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 143360
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 24389
SHA256sum: 6be2e5ec1c35da8eacf2739962573e39dd86c2a5851846835b9f93cd969af772
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 11159
SHA256sum: 509c17bcab0ecea8f44e86c45c020e2aad91fe3b9e68b92a36b57d45ebede189
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 13496
SHA256sum: 8d2efc4d1caab0a11ba05deffa4d74c9edb9866c8d99dbebf5b3e067242c4a70
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 14969
SHA256sum: c5341abc736e9419604ee5adb9fc6dc2593d7cf5d11276390c194c2d4252a0e6
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 10703
SHA256sum: e9461f5d1cc7fc15227939166c101e6f857cd1ce0bc6b0eb685185183c975274
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 4064
SHA256sum: e7e82ca5513ce512225a241fca513312b8dd34a61e406f73cfeddf3a3da4929f
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 337920
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 66013
SHA256sum: b0860d36e78c88c073e85e0ae6e68f01d35aea9802a22630f74322830876646e
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 8142
SHA256sum: bb87e3c22138f90d65b52873b00e932281582a5a1546f3b7978ed004e26decad
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 11471
SHA256sum: 192719b46f6b5b7dcdab1488b7f0a3a674047abf2b67c3c02fa0e9be42c4e511
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 6023
SHA256sum: 198bf7ae963000c89dee24baf1656b3d1088687ca466b8b09d5da5d051f603aa
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 16652
SHA256sum: b566014964b30c1abb4142b7fe163108afed96041d006b4b800f921ec6c91cf9
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 2777
SHA256sum: 3c269f841f67b4fbe0b4de598c2391b71a3cd1a008bdd5954638e1020e235282
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 1955
SHA256sum: e12d90a125c4d246a6cd65386be429960745e6dcb0f10d61a9bba468a89e9972
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 430080
Filename: olsrd_2024.06.09~d72be9ad-r1_powerpc64_e5500.ipk
Size: 152118
SHA256sum: f910fd6091d0be258264660fbe1c09c0e6ac407e00cbdbfe4448d3b52f606f8f
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 645120
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_powerpc64_e5500.ipk
Size: 213127
SHA256sum: 3d958bcc483b83759b093b3782de44f3b4a917e5538c6ed83adec32e9922cb38
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 634880
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_powerpc64_e5500.ipk
Size: 207291
SHA256sum: f84d945dd893729a3683138f628ee264aece2e2bc114c9acc86e472f4b0fdb97
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_powerpc64_e5500.ipk
Size: 2300
SHA256sum: d00f003a30e01cc4ff4fef44b7c9e9657b3be32053db53ef8c55d61f6b3dad2a
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc64_e5500
Installed-Size: 921600
Filename: oonf-olsrd2_2022.08.25~1cec9b21_powerpc64_e5500.ipk
Size: 305149
SHA256sum: ca7314c00f36f40b583f2ec3a2566f5480734a995cb5167f6af62e92458e2747
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: powerpc64_e5500
Installed-Size: 696320
Filename: opennds_10.3.0-r1_powerpc64_e5500.ipk
Size: 166817
SHA256sum: ffcff6dbacaf2d3b9aeb8f66eebffc59365c4012003ed5a65895cba73f4222c2
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: powerpc64_e5500
Installed-Size: 358400
Filename: pimbd_2018.06.19~dbf4e591-r4_powerpc64_e5500.ipk
Size: 91554
SHA256sum: 8d872330a613282a5abf5e00e8effd68a634c7c769b61267dda11b3031fa69ca
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: powerpc64_e5500
Installed-Size: 276480
Filename: prince_0.4-r3_powerpc64_e5500.ipk
Size: 44021
SHA256sum: 3250c700f92959c026fd669ef82ba366a830ba97b7261824cedf662803ac61f8
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc64_e5500
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_powerpc64_e5500.ipk
Size: 13169
SHA256sum: ca2541233c651bb21dc7423dc81b108093f5cc976a2f55d596bc5cee9cfffbf1
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: powerpc64_e5500
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_powerpc64_e5500.ipk
Size: 11070
SHA256sum: 5127be630c82a7d5853b834eb009a783d1654e3a0d892e83fded51354a1c549a
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.