<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE book
	PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
	"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
    [<!ENTITY imgscale "60">]>
<!-- $Revision: 1.23 $ -->
<book>
  <bookinfo>
    <title>User's Manual for Thuban 1.0</title>
	<authorgroup>
      <author>
        <firstname>Jonathan</firstname><surname>Coles</surname>
      </author>
      <author>
        <firstname>Jan-Oliver</firstname><surname>Wagner</surname>
      </author>
      <author>
        <firstname>Frank</firstname><surname>Koormann</surname>
      </author>
	</authorgroup>
    <copyright>
      <year>2003</year>
      <holder>Intevation GmbH</holder>
    </copyright>
   <revhistory>
<!-- comment this first revision out when releasing a real version -->
<!--
     <revision>
        <revnumber>CVS version $Id: thuban-manual.xml,v 1.23 2003/12/05 13:54:46 frank Exp $</revnumber>
        <date></date>
        <revremark>Under development.</revremark>
     </revision>
-->
     <revision>
        <revnumber>1.0pre3</revnumber>
        <date>04-Dec-2003</date>
        <revremark>
			Corresponds to Thuban 1.0rc1
			New: I18n, right button legend menu, EPSG projectons,
            PostGIS support.
		</revremark>
     </revision>
     <revision>
        <revnumber>1.0pre2</revnumber>
        <date>29-Aug-2003</date>
        <revremark>
			Corresponds to Thuban development release 0.8.1.
			New: chapter on extensions.
		</revremark>
     </revision>
     <revision>
        <revnumber>1.0pre1</revnumber>
        <date>08-Aug-2003</date>
        <revremark>Corresponds to Thuban development release 0.8.1.</revremark>
     </revision>
  </revhistory>

  </bookinfo>

  <chapter><title>Introduction</title>
    <para>
    Thuban is an interactive geographic data viewer.
    It has been developed because there was no simple interactive
    viewer for geographic information available as Free Software. Thuban is 
    written in Python and C++ and uses the wxWindows library allowing it to 
    run on many different platforms, including GNU/Linux and Windows.
    </para>
    <para>
    Geographic data viewers are a necessary tool as they allow one to
	get a visual 
    impression of the positional relationship of the information that may not
    be apparent from simple inspection of the data values themselves. 
    Thuban allows the user to create a session that displays
    geographic data and then explore that data through navigation and
    manipulation of how it is drawn. The results can then be saved or printed.
    </para>
    <para>
    Thuban arranges a session in a hierarchy. A session contains a map which
    consists of layers. Each layer represents one kind of data set. For 
    instance, there may be a layer for roads and another layer for buildings. 
    These layers can either be vector shapes or images.
    </para>

  	<section><title>Installation</title>
        <para>
        Thuban is actively supported under Debian Testing (sarge), RedHat 7.2, 
        and Windows 2000. Thuban depends on the following packages. These
        packages can also be found on the 
        <ulink url="http://thuban.intevation.org/download.html">
        Thuban Download site
        </ulink>.
	</para>
	<para>
	Required:
        <itemizedlist>
            <listitem><para>Python 2.2.1 (<literal>http://www.python.org</literal>)</para></listitem>
            <listitem><para>wxWindows 2.4 (<literal>http://www.wxwindows.org</literal>)</para></listitem>
            <listitem><para>wxPython 2.4 (<literal>http://www.wxpython.org</literal>)</para></listitem>
            <listitem><para>proj 4.4.5 Projection Library (<literal>http://www.remotesensing.org/proj/</literal>)</para></listitem>
            <listitem><para>SQLite 2.8.3 (<literal>http://www.hwaci.com/sw/sqlite/</literal>)</para></listitem>
            <listitem><para>PySQLite 0.4.3 (<literal>http://pysqlite.sourceforge.net</literal>)</para></listitem>
	</itemizedlist>
	</para>
	<para>
	Optional:
        <itemizedlist>
            <listitem><para>GDAL 1.1.8 (<literal>http://www.remotesensing.org/gdal/</literal>)</para></listitem>
            <listitem><para>psycopg 1.0.8 (<literal>http://initd.org/software/psycopg</literal>)</para></listitem>
	    </itemizedlist>
        </para>
		<para>
		Along with the source codes, the download page also offers
		full installation packages for Debian, Windows and RPM-based systems
		(Mandrake, RedHat, SuSE, etc).
		</para>
  		<section><title>RPM-based GNU/Linux Systems</title>
  			<section><title>Installing Binary Packages</title>
				<para>
				The most wide-spread RPM-based GNU/Linux Systems are RedHat,
				Mandrake and SuSE. The documentation of these distributions
				should contain information about how to install third-party
				RPM packages. Nonetheless, a short summary is provided here.
				</para>
				<para>
				RPM packages can be installed applying several tools.
				The most basic one is the command line program "rpm".
				The hardware architecture is identified in the name
				of RPM packages, eg. 'i386' for most Intel/AMD architectures.
				If you have a different hardware architecture, where no
				binary RPM packages are provided, you must rebuild binary
				packages from the RPM source packages first (see below).
				Typical rpm commands look like:

				<programlisting>
				rpm --install Thuban-0.9.0-1.i386.rpm
				</programlisting>

				Depending on what you already have installed on your
				system, you are informed that some packages are
				required, but not installed. You need to install them
				first. Either they are provided by your GNU/Linux distributor
				or available somewhere on the Internet.
				The more essential and special ones are provided together
				with the Thuban package.
				</para>

				<para>
				For rpm exist some graphical user interfaces, notably
				kpackage, GnoRPM and xrpm.
				</para>

				<para>
				Make yourself familiar with one of the tools and apply it
				to install the packages.
				Note, that you need to be administrator (root) for the system
				to do that.
				</para>
  			</section>
  			<section><title>Build Binaries from Source Packages</title>
				<para>
				This section describes howto build RPM install-packages
				from RPM source-packages.
				This adapts and optimizes an install-package specifically
				to your system.
				This is especially helpful to resolve version conflicts of
				dependent packages. Furthermore, install-packages for other
				platforms (e.g. PowerPC) can be created.
				</para>

				<para>
				Note: rpm must be at least version 4. Execute
				<literal>rpm --version</literal> to find out about the version.
				</para>

				<para>
				You need to do the following preparations to be able to
				build the packages as a regular user. You should now
				perform the package buling as root since this
				might cause damage to your system.
        		<itemizedlist>
            		<listitem>
						<para>
						Create RPM directory structure:
						Choose a directory (e.g. $HOME/myrpm) and create the
						subdirectories BUILD, RPM, SOURCES, SPECS and SRPMS.
						A possible command sequence for this is:
						<programlisting>
						mkdir $HOME/freegisrpm
						cd $HOME/freegisrpm
						mkdir BUILD RPMS SOURCES SPECS SRPMS
						</programlisting>
						</para>
					</listitem>
					<listitem>
						<para>
						Set environment variable RPM_DIR:
						<programlisting>
						export RPM_DIR=$HOME/freegisrpm
						</programlisting>
						</para>
					</listitem>
					<listitem>
						<para>
						Create $HOME/.rpmmacros:
						This file sets general preferences and some
						specific settings for signing packages.
						If you don't have a GnuPG-key, you can skip
						the signature settings i.e. drop the last 4 lines.
						A signature becomes important when you want to
						give away packages to third parties.
						<programlisting>
<![CDATA[
%packager Name Lastname <Name.Lastname@mydomain.example> 

%_topdir /home/mylogin/myrpm

%_signature gpg
%_gpg_name Name Lastname
%_pgp_path ~/.gnupg
%_pgpbin /usr/bin/gpg
]]>
						</programlisting>
						</para>
					</listitem>
        		</itemizedlist>

				Now you can install any RPM source-package.
				It's components are installed into the corresponding
				subdirectories of your rpm-directory.
				Essentially these are the sources (into directory SOURCES)
				and the so-called spec-file which contains all build
				instructions. The spec-file will go into the SPEC directory.
				Example:
				<literal>rpm --install Thuban-0.9.0-1.src.rpm</literal>
				</para>

				<para>
				Create install-package:
				Go to the directory with the spec-files and rebuild the
				package:
				<programlisting>
cd $HOME/mypm/SPECS
rpm -bb thuban.spec
				</programlisting>
				Next, you will find the newly created package in
				$HOME/myrpm/RPMS/i386.
				If you build the package for another architecture than
				i386, then the name of the directory has a corresponding name.
				</para>
				<para>
				For documentation of RPM, either type
				<literal>man rpm</literal> or <literal>rpm --help</literal>.
				This will provide you with information on the various command
				line options of RPM.
				For more information see the
        		<ulink url="http://www.rpm.org/">homepage of RPM</ulink>.
				</para>
  			</section>
  		</section>
  	</section>

	<section><title>Internationalization</title>
        <para>
	Thuban is implemented with internationalization support. So far Thuban
	is translated by volunteers to the following languages (apart from its
	main language: English):
	<itemizedlist>
            <listitem><para>French</para></listitem>
            <listitem><para>German</para></listitem>
            <listitem><para>Italian</para></listitem>
            <listitem><para>Russian</para></listitem>
            <listitem><para>Spanish</para></listitem>
	</itemizedlist>
	</para>

	<para>
	To use internationalization under POSIX systems (like GNU/Linux)
	you have to set the environment variable LC_ALL accordingly (e.g.
	LC_ALL=fr_FR for the french language support). Please check your 
	systems documentation for details and supported settings.
	Specifiying LC_ALL on the command line while launching thuban 
	allows appication specific language settings.
	</para>

	<para>
	MS Windows users have to specify the language to be used via the control
	bar (which effects all applications).
	</para>
	</section>

  	<section><title>The Main Window</title>
    	<para>
	<figure>
	<title>The Main Window</title>
        <mediaobject>
        <imageobject> <imagedata fileref="../images/1_2_mainwindow.png" format="PNG" scale="&imgscale;"/> </imageobject>
        <imageobject> <imagedata fileref="./images/1_2_mainwindow.ps" format="EPS" scale="&imgscale;"/> </imageobject>
        </mediaobject>
	</figure>
        </para>

        <para>
        The map window shows the current state of the map and is where
        the user can interact with the map using the tools. 
        </para>

        <para>
        The legend on the left displays a list of the current layers and 
        any visible classification groups. In the example, each shape layer 
        has a default classification which specifies how the shapes in each 
        layer are drawn. Layers that are higher in the list appear 
        ``closer'' to the user. The legend can be closed by clicking on the 
        small X in the upper right-hand region of the legend. 
        To open it again, use
        <menuchoice>
        <guimenu>Map</guimenu>
        <guimenuitem>Legend</guimenuitem>
        </menuchoice>.
        The legend is also dockable, which means that it can be detached 
        from the main window by clicking on the small button next to the 
        close button. It can be attached by clicking the same button
        again.
        </para>
        <para>
        The status bar displays different information depending on the
        current context. If the user is selecting an item from the menu
        then the status bar will display a short help message indicating
        what each menu item is for. If the user has a tool selected then
        the position of the cursor on the map is displayed.
        </para>
        <para>
        The tool bar provides quick access to the commonly needed tools.
        By hovering over each button the user can see a short messages
        describing what the tool does. The tools provided are Zoom In, Zoom
        Out, Pan, Full Extent, Full Layer Extent, Full Shape Extent, Identify,
        and Label. Each of the tools will be explained in further detail later
        in the manual.
        </para>
  	</section>

  </chapter>

  <chapter><title>Session Management</title>

  	<section><title>Starting a New Session</title>
    	<para>
        A new session can be started from 
        <menuchoice>
        <guimenu>File</guimenu>
        <guimenuitem>New Session</guimenuitem>
        </menuchoice>. 
        If a session is already loaded and has been modified without
        being saved a prompt will ask if the current session should
        be saved. A new session consists of an empty map with no
        layers and no tables.
    	</para>
  	</section>

  	<section><title>Opening a Session</title>
    	<para>
        A session can be opened from 
        <menuchoice>
        <guimenu>File</guimenu>
        <guimenuitem>Open Session</guimenuitem>
        </menuchoice>. A dialog box will open allowing the user to browse
        for a Thuban Session file. Thuban session files end with
        <varname>.thuban</varname>. Selecting a file a clicking
        <guibutton>OK</guibutton> will load the session into Thuban.

        If a session is already loaded and has been modified without
        being saved a prompt will ask if the current session should
        be saved.
    	</para>
  	</section>

  	<section><title>Saving a Session</title>
    	<para>
        A session can be saved from 
        <menuchoice>
        <guimenu>File</guimenu>
        <guimenuitem>Save Session</guimenuitem>
        </menuchoice>. A dialog box will open allowing the user to browse
        the file system and select a place to save the session. Thuban
        sessions should be saved under a name ending in 
        <varname>.thuban</varname>. If the file already exists the user
        will be prompted to save under a different name or overwrite the
        existing file.
    	</para>
  	</section>

  	<section><title>The Session Info-Tree</title>
        <para>
        <figure>
        <title>Session Info Tree</title>
        <mediaobject>
        <imageobject><imagedata fileref="../images/2_4_session_tree.png" format="PNG" scale="&imgscale;"/></imageobject>
        <imageobject><imagedata fileref="./images/2_4_session_tree.eps" format="EPS" scale="&imgscale;"/></imageobject>
        </mediaobject>
        </figure>
        </para>
    	<para>
        The session info-tree is primarily intended for developers working
        with Thuban. It displays many of the internal values for the session,
        map, and layers. It can be opened from
        <menuchoice>
        <guimenu>File</guimenu>
        <guimenuitem>Session Tree</guimenuitem>
        </menuchoice>. 
    	</para>
  	</section>
  </chapter>

  <chapter><title>Map Management</title>
    <para>
    The map consists of a number of layers where each layer represents a
    different type of data set. By interacting with the map the user can
    visually explore the data. 
    </para>
    <para>
    The map can have a name that will appear in the Thuban title bar. 
    The map name can be changed using 
    <menuchoice>
    <guimenu>Map</guimenu>
    <guimenuitem>Rename</guimenuitem>
    </menuchoice>.
    </para>
    <para>
    <inlinemediaobject>
    <imageobject> 
    <imagedata fileref="../images/3_rename_map.png" format="PNG" scale="&imgscale;"/> 
    </imageobject> 
    <imageobject> 
    <imagedata fileref="./images/3_rename_map.eps" format="EPS" scale="&imgscale;"/> 
    </imageobject>
    <textobject> <phrase>Rename Map</phrase> </textobject>
    </inlinemediaobject>
    </para>

  	<section><title>Adding and Removing Layers</title>
    	<para>
        There are three types of layers that can be added to a map: 
	Shape layers, database layers
        and image layers. Shape layers are stored in Shapefile format, a
        widely used file format for storing geographic objects. These
        files have the extension ``.shp''. Associated with
        the shape file is a database file which stores attributes for
        each shape in the Shape file. This file, in dBase format, 
        has the extension ``.dbf''. Both files must have the same base name.
        For example, if there is a shape file named roads.shp there must
        also be a file roads.dbf.
    	</para>
	<itemizedlist>
	<listitem>
	<para>
        Shape layers can be added to the map with
        <menuchoice>
        <guimenu>Map</guimenu>
        <guimenuitem>Add Layer</guimenuitem>
        </menuchoice>.
        Initially, only the ``.shp'' files are shown which is enough for the
		selection. However, if you switch to display all files and select one
		of the associated files (e.g. ``.dbf''), Thuban will recognize the base
		name and load the corresponding Shape file.
    	</para>
		<para>
		The file dialog for Shape files allows to select multiple files.
		Use the shift-button together with the left mouse button to extend
		the selection.
    	</para>
	</listitem>

	<listitem>
    	<para>Database layers can be added to the map with 
	<menuchoice>
        <guimenu>Map</guimenu>
        <guimenuitem>Add Database Layer</guimenuitem>
        </menuchoice>.
	A dialog with two is list is opened. The left list displays all 
	database connections currently open for the session. You can retrieve 
	a list of available layers from the selected database which is
	displayed on the right hand. From this list one layer can be selected,
	the dialog is closed afterwards. 
    	</para>
	<para>
	See appendix ``Working with PostGIS'' for details.
	</para>
	</listitem>

	<listitem>
    	<para>
        Image layers can be added to the map with
        <menuchoice>
        <guimenu>Map</guimenu>
        <guimenuitem>Add Image Layer</guimenuitem>
        </menuchoice>.
        It is important to select a valid image file that has geographic
        data associated with it. The data can be embedded in the file itself, 
        or in another file. If geographic information cannot be found, Thuban 
        will report an error.
    	</para>
	</listitem>
	</itemizedlist>
  	</section>

  	<section><title>Navigation</title>
    	<para>
        The map can be explored by using the navigation tools available on 
        the tool bar or from the 
        <menuchoice><guimenu>Map</guimenu></menuchoice> menu. 
    	</para>
	<itemizedlist>
	<listitem>
    	<para>
        The ZoomIn tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_zoomin.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_zoomin.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>ZoomIn Tool</phrase> </textobject>
        </inlinemediaobject>
        enlarges a region of the map. Clicking once on the map
        will double the magnification and center the map on the point that
        was clicked. Clicking and dragging selects a region that will be
        enlarged to fit the window.
    	</para>
	</listitem>
	<listitem>
    	<para>
        The ZoomOut tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_zoomout.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_zoomout.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>ZoomOut Tool</phrase> </textobject>
        </inlinemediaobject>
        shrinks the map so that a larger region is visible. A single click
        reduces the magnification by a factor of two. Clicking and dragging
        selects a box such that the current contents of the window will be
        scaled to fit into that box.
    	</para>
	</listitem>
	<listitem>
    	<para>
        The Pan tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_pan.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_pan.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Pan Tool</phrase> </textobject>
        </inlinemediaobject>
        allows the user to move the map around by clicking and dragging.
    	</para>
	</listitem>
	<listitem>
    	<para>
        The Full Extent tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_fullextent.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_fullextent.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Full Extent Tool</phrase> </textobject>
        </inlinemediaobject>
        rescales the viewable region so that the entire map is visible.
    	</para>
	</listitem>
	<listitem>
    	<para>
        The Full Layer Extent tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_fulllayerextent.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_fulllayerextent.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Full Layer Extent Tool</phrase> </textobject>
        </inlinemediaobject>
        rescales the viewable region so that the currently selected
        layer fits within the window. If no layer is selected this button 
        will be disabled.
    	</para>
	</listitem>
	<listitem>
    	<para>
        The Full Shape Extent tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_fullshapeextent.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_fullshapeextent.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Full Shape Extent Tool</phrase> </textobject>
        </inlinemediaobject>
        rescales the viewable region so that the currently selected
        shape fits within the window. If the shape is a point, it is
        centered and the map is zoomed all the way in. If no shape is 
        selected this button will be disabled. This feature is especially
        helpful when identifying an object related to a selected record 
        in a tableview (see below).

    	</para>
	</listitem>
	</itemizedlist>
  	</section>

  	<section><title>Object Identification</title>
    	<para>
        Objects on the map can be identified using the Identify tool
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_3_identify.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_3_identify.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Identify Tool</phrase> </textobject>
        </inlinemediaobject>.
        Clicking on an object selects that object and opens a dialog which 
        shows all the table attributes for that object. Any current selection
        is lost. Objects on the map are typically shapes and this document
        will often refer to objects as shapes.
    	</para>
  	</section>

  	<section><title>Object Labeling</title>
    	<para>
        Objects can be labeled using the Label tool
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_3_label.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_3_label.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Label Tool</phrase> </textobject>
        </inlinemediaobject>.
        Clicking on an object selects that object and opens a dialog which
        displays the table attributes for that object. An attribute can
        be selected to be the label on the map. The label will be placed
        at the center of the shape. Clicking on an object that already has 
        a label will remove the label.
    	</para>
  	</section>

  	<section><title>The Legend</title>
        <para>
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_5_legend.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_5_legend.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Legend</phrase> </textobject>
        </inlinemediaobject>
        </para>
    	<para>
        The Legend provides an overview of the layers in the map. Layers
        that appear higher in the legend will appear ``closer'' to the user.
        If a layer supports classification (currently, only shape layers 
        have this feature) then the classification groups will be shown
        below each layer. The properties for each group are also displayed
        with a small graphic. Polygon layers appear as rectangles, lines
        appear as curved lines, and points appear as circles. 
        </para>
        <para>
        Along the top of the legend is a toolbar which allows quick access
        to some of the layer manipulation options under
        <menuchoice><guimenu>Map</guimenu></menuchoice>. 
        </para>

	<itemizedlist>
	<listitem>
        <para>
        The Move Layer to Top tool
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_5_totop.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_5_totop.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Move Layer to Top</phrase> </textobject>
        </inlinemediaobject> raises the selected layer to the top of the map.
        </para>
	</listitem>
	<listitem>

        <para>
        The Move Layer Up tool
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_5_moveup.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_5_moveup.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Move Layer Up</phrase> </textobject>
        </inlinemediaobject> raises the selected layer one level.
        </para>
	</listitem>
	<listitem>

        <para>
        The Move Layer Down tool
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_5_movedown.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_5_movedown.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Move Layer Down</phrase> </textobject>
        </inlinemediaobject> lowers the selected layer one level.
        </para>

	</listitem>
	<listitem>
        <para>
        The Move Layer to Bottom tool
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_5_tobottom.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_5_tobottom.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Move Layer to Bottom</phrase> </textobject>
        </inlinemediaobject> lowers the selected layer to the bottom of the map.
        </para>

	</listitem>
	<listitem>
        <para>
        The Visible tool
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_5_visible.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_5_visible.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Visible</phrase> </textobject>
        </inlinemediaobject> shows the selected layer in the map if it was
        hidden.
        </para>

	</listitem>
	<listitem>
        <para>
        The Invisible tool
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_5_invisible.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_5_invisible.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Invisible</phrase> </textobject>
        </inlinemediaobject> hides the selected layer in the map.
        </para>

	</listitem>
	<listitem>
        <para>
        The Properties tool
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_5_props.png" format="PNG" scale="&imgscale;"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_5_props.eps" format="EPS" scale="&imgscale;"/> 
        </imageobject>
        <textobject> <phrase>Properties</phrase> </textobject>
        </inlinemediaobject> opens the layer's properties dialog box.
        Double-clicking on a layer or a group of a layer will open the 
        properties dialog for that layer.
    	</para>
	</listitem>
	</itemizedlist>

	<para>
	The most used layer related actions are also available from a 
	popup menu. It is raised when a layer is clicked with the right mouse
	button.
	</para>
	
	<para>
        <figure>
        <title>Layer Popup Menu</title>
        <mediaobject>
        <imageobject><imagedata fileref="../images/3_5_popup_menu.png" format="PNG" scale="&imgscale;"/></imageobject>
        <imageobject><imagedata fileref="./images/3_5_popup_menu.eps" format="EPS" scale="&imgscale;"/></imageobject>
        </mediaobject>
        </figure>
        </para>

        <para>
        Along the bottom of the legend is the scalebar. The scalebar
        will be available if there are any layers and the  map has a 
        projection set.
        </para>
  	</section>

  	<section><title>Exporting</title>
        <para>
        Under Windows, maps can be exported in Enhanced Metafile format
        (<varname>.wmf</varname>)
        from 
        <menuchoice>
        <guimenu>Map</guimenu>
        <guimenuitem>Export</guimenuitem>
        </menuchoice> for use in reports, presentations, or further 
        modification. The current map view, legend, and, if available,
        scalebar are exported. Under other platforms this option is not 
        available. Clicking this menu item open a file selection dialog 
        that lets the user select a location to export the map. 
        </para>
  	</section>

  	<section><title>Printing</title>
    	<para>
        The map can be printed using 
        <menuchoice>
        <guimenu>Map</guimenu>
        <guimenuitem>Print</guimenuitem>
        </menuchoice>. The current map view, legend, and, if available,
        scalebar are printed. A standard printing dialog will open allowing 
        the user to configure the printer. This dialog will differ depending
        on which platform Thuban is running.
    	</para>
  	</section>

  </chapter>

  <chapter><title>Layer Management</title>
    <para>
    </para>

  	<section><title>Types of Layers</title>
    	<para>
        There are three types of layers supported by Thuban: shape layers,
	database layers and
        image layers. Shape layers consist of vector based shapes with 
        geo-referenced coordinates. There are three types of supported 
        shapes: polygons, lines (arc), and points. Database layers are similar
	to shape layers but loaded from a database instead of the file system.
	Image layers can be any image
        file format supported by the Geo-spatial Data Abstraction Library
        (GDAL). The images must have geographic
        coordinate data either embedded within the file or in a separate
        file that is in the same directory as the image file. GeoTIFF files 
        work very well with Thuban and were designed specifically to be image 
        layers in GIS programs.
    	</para>
        <para>
        All actions in the
        <menuchoice>
        <guimenu>Layer</guimenu>
        </menuchoice> menu act on the currently selected layer in the legend.
        </para>
  	</section>

  	<section><title>Properties</title>
    	<para>
        To view the properties for a layer it must first be selected in the
        legend. The menu option
        <menuchoice>
        <guimenu>Layer</guimenu>
        <guimenuitem>Properties</guimenuitem>
        </menuchoice> opens a dialog that displays a layer's properties.
        All layers have a title which can be modified in the text field
        provided. The type of layer is also shows. If the type is a type
        of shape (polygon, arc, point) the classification table will be
        shown. Image layers have no other properties other than title 
        and type.
    	</para>
        <para>
        <figure>
        <title>Properties Window</title>
        <mediaobject>
        <imageobject><imagedata fileref="../images/4_2_layer_properties.png" format="PNG" scale="&imgscale;"/></imageobject>
        <imageobject><imagedata fileref="./images/4_2_layer_properties.eps" format="EPS" scale="&imgscale;"/></imageobject>
        </mediaobject>
        </figure>
    	</para>
        <para>
        <figure>
        <title>Properties Window</title>
        <mediaobject>
        <imageobject><imagedata fileref="../images/4_2_raster_layer_properties.png" format="PNG" scale="&imgscale;"/></imageobject>
        <imageobject><imagedata fileref="./images/4_2_raster_layer_properties.eps" format="EPS" scale="&imgscale;"/></imageobject>
        </mediaobject>
        </figure>
    	</para>
  	</section>

  	<section><title>Visibility</title>
    	<para>
        Sometimes it is not desirable to view all layers at the same time.
        Some layers may take a long time to draw and so while navigating
        around the map the user may not want to wait for the map to redraw
        all the layers each time the map is changed. Each layer can be 
        independently turned on or off using the 
        <menuchoice>
        <guimenu>Layer</guimenu>
        <guimenuitem>Show</guimenuitem>
        </menuchoice>
        or
        <menuchoice>
        <guimenu>Layer</guimenu>
        <guimenuitem>Hide</guimenuitem>
        </menuchoice> options respectively.
    	</para>
  	</section>

  	<section><title>Duplication</title>
    	<para>
        Layers and all their properties, including classifications, can
        be duplicated using 
        <menuchoice>
        <guimenu>Layer</guimenu>
        <guimenuitem>Duplicate</guimenuitem>
        </menuchoice>. Duplicating a layer is useful if the user wishes
        to model a layer in several different ways. Even though the layers
        overlap, by carefully selecting the shape properties it is possible
        to display several pieces of information at once. For example, one
        copy of a roads layer may be classified on a length property and
        another copy may be classified on a type property. If the length
        property was expressed with color and the type property expressed
        with line thickness then it would be possible to view both
        classifications by placing the type property copy over the 
        length property copy.
    	</para>
  	</section>

  </chapter>

  <chapter><title>Layer Classifications</title>
    <para>
    A layer classification is a way of assigning drawing properties to
    groups of shapes based on attributes stored in the layer's table. 
    Only layer's with shapes can have a classification; image layers
    cannot be classified.
    </para>
    <para>
    A classification consists of a number of groups, each group
    having a value or range of values to match against, and symbol 
    properties which control how a shape is drawn on the map. The user
    selects which field in the table is used by the classification and
    when the map is drawn the value for that field for each shape is
    compared with each group's value. The properties of the first group 
    to match are used to draw the shape. This allows the user to get a 
    visual impression of not only how the data is laid out but also what 
    kind of data lies where.
    </para>
    <para>
    A layer always has a classification. When a new layer is added to the
    map, a default classification is created with the DEFAULT group. This
    group cannot be removed but can be hidden (see below). Every shape in the 
    layer, regardless of its attributes, will match this group if no other 
    group matches. 
    </para>

  	<section><title>Editing Classifications</title>
    	<para>
        A layer's classification can be modified under the properties dialog 
        (<menuchoice>
        <guimenu>Layer</guimenu>
        <guimenuitem>Properties</guimenuitem>
        </menuchoice>). The layer's classification field can be set to None, 
        which simply assigns a DEFAULT group to the classification. No new 
        groups can be added to the classification if the field is None.
        The user must first select a field to classify on. New groups can
        be added to the classification with the <guibutton>Add</guibutton>
        button. 
        </para>
        <para>
        To apply the changes to the map the user can click
        either <guibutton>Try</guibutton> or <guibutton>OK</guibutton>.
        <guibutton>Try</guibutton> will not close the dialog box, allowing
        the user to see how the classification changes the map. 
        <guibutton>Revert</guibutton> will undo the last classification applied
        to the map. <guibutton>OK</guibutton> will commit the changes and
        close the dialog. The user will be unable to undo the changes.
        <guibutton>Close</guibutton> simply closes the dialog box. If any
        changes have not been applied with <guibutton>Try</guibutton> the 
        changes will not be applied to the map.
        </para>
        <para>
        <figure>
        <title>Properties Window</title>
        <mediaobject>
        <imageobject><imagedata fileref="../images/5_classification.png" format="PNG" scale="&imgscale;"/></imageobject>
        <imageobject><imagedata fileref="./images/5_classification.eps" format="EPS" scale="&imgscale;"/></imageobject>
        </mediaobject>
        </figure>
        </para>
        <para>
        The order of the groups in the classification is significant
        except for the DEFAULT group, which remains at the top. When shapes
        are matched against groups the matching begins at the first group
        after the DEFAULT group so that groups higher in the list will 
        be checked first. Matching for a 
        given shape will stop at the first group that matches. The user can
        use <guibutton>Move Up</guibutton> and <guibutton>Move Down</guibutton>
        to change the order of the groups. The DEFAULT group will always 
        match a shape that hasn't matched another group.
    	</para>
  	    <section><title>Visible</title>
    	    <para>
            The Visible column has check-boxes that determine whether a
            classification group will be displayed in the legend. This is
            useful if the user knows that the groups completely cover
            the data set and don't want the DEFAULT group to be displayed
            in the legend and on a printout.
            </para>
        </section>
  	    <section><title>Symbols</title>
    	    <para>
            Each type of shape has its own type of symbol. Thuban supports three
            types of shapes: polygons, lines, and points. Polygons and points 
            have outline and fill color, while lines have only line color. Each 
            group has associated symbol properties. To edit the symbol 
            properties for a group the user can double click on the Symbol 
            column or select a group and click the 
            <guibutton>Edit Symbol</guibutton> button.
    	    </para>
  	    </section>
        <section><title>Value</title>
            <para>
            The Value column of the classification table is the value that will
            be matched when the map is being drawn. The type of data that can
            entered into this field depends on the type of data of the 
            classification field. 
            </para>
            <para>
            If the field is of type Text, anything entered
            into the field is valid. The text will be compared literally to the
            value of the shape attribute, including case sensitivity. 
            If the type is Integer, then any valid integer may be entered. In 
            addition, with special syntax, a range of values can be entered.
            A range from <varname>start</varname> to <varname>end</varname> 
            inclusive is specified like this: <literal>[start;end]</literal>.
            The exclusive range is specified like this: 
            <literal>]start;end[</literal>. Ranges can include infinity like
            this: <literal>[-oo;oo]</literal>. Field types can also be of type
            Decimal. They represent any rational number and can be used in 
            ranges as well.
            </para>
  	    </section>
  	    <section><title>Label</title>
    	    <para>
            By default, the text that is displayed for a group in the legend
            is the value for that group. The label can substitute a more
            descriptive term in the legend.
            </para>
        </section>
  	</section>

  	<section><title>Generating Classes</title>
    	<para>
        <figure>
        <title>Generate Class</title>
        <mediaobject>
        <imageobject><imagedata fileref="../images/5_3_genclass.png" format="PNG" scale="&imgscale;"/></imageobject>
        <imageobject><imagedata fileref="./images/5_3_genclass.eps" format="EPS" scale="&imgscale;"/></imageobject>
        </mediaobject>
        </figure>
    	</para>
    	<para>
        Creating a classification by hand can be tedious. 
        Thuban, therefore, provides a means of generating an entire
        classification at once while still giving the user control over
        how it appears. Clicking <guibutton>Generate Class</guibutton>
        opens the <varname>Generate Classification</varname> dialog.
        Under the <varname>Generate</varname> pull down there are at most
        three different ways to generate classifications: 
        Unique Values, Uniform Distribution, and Quantiles. Some options 
        may not be available if the data type for the field does not
        support them. For instance, <varname>Uniform Distribution</varname>
        doesn't make sense for a Text field.
    	</para>
        <para>
        For every way of generating a classification, a color scheme must
        be selected. Thuban provides several different color schemes that
        affect how the group properties change over the classification.
        It may be desirable that only certain properties change over the
        classification. If the shape type is a polygon or a point then
        the <guibutton>Fix Border Color</guibutton> option will be available.
        This allows the user to select a border color for all classification
        groups.
        It is also possible to create a custom color scheme. Selecting
        this option will display two symbols: the one of the left has the
        properties of the first group and the one on the right has the 
        properties of the last group. Thuban will interpolate between these
        two properties to generate the other groups.
        <figure>
        <title>Custom Color Scheme</title>
        <mediaobject>
        <imageobject><imagedata fileref="../images/5_2_custom_ramp.png" format="PNG" scale="&imgscale;"/></imageobject>
        <imageobject><imagedata fileref="./images/5_2_custom_ramp.eps" format="EPS" scale="&imgscale;"/></imageobject>
        </mediaobject>
        </figure>
        </para>
        <para>
        The Unique Values option lets the user select specific values that
        appear in the table. Clicking <guibutton>Retrieve From Table</guibutton>
        searches the table for all unique values and displays them in the
        list on the left. Items can be selected and moved to the list on the
        right. Each list can be sorted or reversed for easier searching.
        The classification that is generated will be in the same order as
        the list on the right.
        <figure>
        <title>Unique Values</title>
        <mediaobject>
        <imageobject><imagedata fileref="../images/5_2_unique_values.png" format="PNG" scale="&imgscale;"/></imageobject>
        <imageobject><imagedata fileref="./images/5_2_unique_values.eps" format="EPS" scale="&imgscale;"/></imageobject>
        </mediaobject>
        </figure>
        </para>
        <para>
        The Uniform Distribution option creates a user specified number of
        groups of ranges such that each range covers equal intervals. The
        minimum and maximum values can automatically be retrieved from the
        table by clicking <guibutton>Retrieve From Table</guibutton>. The
        stepping is how large each interval is. Adjusting this value will
        automatically recalculate how many groups is appropriate.
        <figure>
        <title>Uniform Distribution</title>
        <mediaobject>
        <imageobject><imagedata fileref="../images/5_2_uniform_dist.png" format="PNG" scale="&imgscale;"/></imageobject>
        <imageobject><imagedata fileref="./images/5_2_uniform_dist.eps" format="EPS" scale="&imgscale;"/></imageobject>
        </mediaobject>
        </figure>
        </para>
        <para>
        The Quantiles option generates ranges based on the number of items
        in the table. For example, by specifying five groups Thuban will
        generate five groups with appropriate ranges such that 20% of the table
        data is in each group. If it is impossible to generate exact
        groupings, Thuban will issue a warning but allow the user to continue.
        <figure>
        <title>Quantiles</title>
        <mediaobject>
        <imageobject><imagedata fileref="../images/5_2_quantiles.png" format="PNG" scale="&imgscale;"/></imageobject>
        <imageobject><imagedata fileref="./images/5_2_quantiles.eps" format="EPS" scale="&imgscale;"/></imageobject>
        </mediaobject>
        </figure>
        </para>
  	</section>
  </chapter>

  <chapter><title>Projection Management</title>
    <para>
    Projections control how the geographic data is displayed on the screen.
    If multiple layers are loaded into Thuban where the geographic data
    is in a different projection system, then the user must specify a
    projection for each layer. The user must also tell Thuban which
    projection the map is in. This can be the same as the layers or a different
    projection in which case the layers are reprojected into that space.
    The map projection can be set using 
    <menuchoice>
    <guimenu>Map</guimenu>
    <guimenuitem>Projection</guimenuitem>
    </menuchoice> and the layer projection can be set using 
    <menuchoice>
    <guimenu>Layer</guimenu>
    <guimenuitem>Projection</guimenuitem>
    </menuchoice>.
    <figure>
    <title>Projection Window</title>
    <mediaobject>
    <imageobject><imagedata fileref="../images/6_projection.png" format="PNG" scale="&imgscale;"/></imageobject>
    <imageobject><imagedata fileref="./images/6_projection.eps" format="EPS" scale="&imgscale;"/></imageobject>
    </mediaobject>
    </figure>
    </para>
    <para>
    Thuban is distributed with a sample collection of projections and the 
    set of coordinate systems as used by the EPSG
    (European Petroleum Survey Group). This quite large set is only displayed
    if activated by the according checkbox. The set falls into two parts:
    deprecated lists all projections which are no longer part of the 
    EPSG data base.
    </para>
    <para>
	 The
    user can create new projections and make them available to all
    future Thuban sessions. They may also be exported and imported so
    that custom projections can be distributed.
    </para>
  	<section><title>Selecting a Projection</title>
        <para>
        The available projections are listed on the left. If the layer
        or map already has a projection it will initially be highlighted
        and will end with <varname>(current)</varname>. Selecting 
        <varname>&lt;None&gt;</varname> will cause Thuban to use the data as
        it appears in the source file and will not use a projection.
        </para>
    </section>
  	<section><title>Editing a Projection</title>
        <para>
        Whenever a projection is selected from the list its properties
        are displayed on the right. These properties can be changed
        and the changes saved to the selected projection using
        <guibutton>Update</guibutton>. Only a projection that comes
        from a file can be updated, so if the current layer's projection
        is selected, <guibutton>Update</guibutton> will be disabled. 
        <guibutton>Add to List</guibutton> adds the projection to the 
        list of available projections as a new entry, and thus makes it 
        available to future Thuban sessions. Clicking <guibutton>New</guibutton>
        will create an entirely new, empty projection. The 
        <guibutton>Remove</guibutton> button will permanently remove a 
        projection from the list of available projections.
        </para>
        <para>
        To apply the selected projection to the map the user can click
        either <guibutton>Try</guibutton> or <guibutton>OK</guibutton>.
        <guibutton>Try</guibutton> will not close the dialog box, allowing
        the user to see how the projeciton changes the map. 
        <guibutton>Revert</guibutton> will undo the last projection applied
        to the map. <guibutton>OK</guibutton> will commit the changes and
        close the dialog. The user will be unable to undo the changes.
        <guibutton>Close</guibutton> simply closes the dialog box. If no
        selection has been applied with <guibutton>Try</guibutton> the 
        selection will not be applied to the map.
        </para>
    </section>
  	<section><title>Importing/Exporting Projections</title>
        <para>
        The projections that appear in the list of available projections
        can be exported to another file that the user chooses. By selecting
        one or more projections and clicking <guibutton>Export</guibutton>
        the user will be able to select a file in which to store those 
        projections.
        The file can then be distributed to other Thuban users. To import
        a projection file the user can click <guibutton>Import</guibutton>.
        The imported projections are added to the list and are then available
        to the current session and any future Thuban sessions.
        </para>
    </section>
  </chapter>

  <chapter><title>Table Management</title>
    <para>
    Thuban distinguishes two different types of tables: Attribute tables
    (which belong to a layer) and normal data tables. Both provide
   	the same general functionality with the difference that actions on an
    attribute table might also effect the map display.
    </para>

    <section><title>Table View</title>
        <para>
        <figure>
        <title>Table View</title>
        <mediaobject>
        <imageobject><imagedata fileref="../images/7_1_table_view.png" format="PNG" scale="&imgscale;"/></imageobject>
        <imageobject><imagedata fileref="./images/7_1_table_view.eps" format="EPS" scale="&imgscale;"/></imageobject>
        </mediaobject>
        </figure>
        </para>
        <para>
        Thuban provides a standard dialog to display table contents, the 
        Table View. The view has five sections: The title, selections, 
        the table grid, export functions, and the status bar.
        </para>
        <para>
        The title bar identifies the table with its name.
        </para>
        <para>
        The selections box let the user perform simple analysis on the data
        based on comparisons: The first choice must be a field identifier of 
        the table, the second choice determines the type of comparison. The 
        third choice can be either a specific value (interpreted as numerical 
        or string depending on the type of the first field) or a second field 
        identifier. Thus you can perform analysis like selecting all
        records where <literal>population > 10000</literal> or 
        <literal>cars_per_inhabitant < bikes_per_inhabitant</literal> 
        (note that the field names are only explanatory, the dBase files 
        allow only 11 character field names).
      
        Selections can be combined either by applying a selection only on 
        a previously selected set of records or by adding the results of a
        selection to a previous set. The default is that a selection replaces
        earlier results.
        </para>
        <para>
        The table grid shows the contents of the table (one record per row), 
        with highlighted selection results. Columns and rows can be resized.
        </para>
        <para>
        The contents of a table can be exported into a file, either dBase
        format (DBF) or comma separated values (CSV). The 
        <guibutton>Export</guibutton> button 
        raises a file dialog to specify a path and file name, the export type
        is determined by the file extension (either .dbf or .csv).

        The <guibutton>Export Selection</guibutton> button works similarly
        but exports only the selected records.

        The <guibutton>Close</guibutton> button closes the table view window. 
        This is different from the menu item 
        <menuchoice>
        <guimenu>Table</guimenu>
        <guimenuitem>Close</guimenuitem>
        </menuchoice> which unloads the table from Thuban.
        </para>
        <para>
        The status bar displays some statistics about the table and optional
        selection results.
        </para>
    </section>

    <section><title>General Functionality (Menu Table)</title>
        <para>
        The general functions affect all tables open in Thuban. Attribute
        tables are considered here as normal data tables (with the exception
        that they cannot be closed).
        </para>
        <section><title>Open</title>
            <para>
            The 
            <menuchoice>
            <guimenu>Table</guimenu>
            <guimenuitem>Open</guimenuitem>
            </menuchoice> 
            item raises a file dialog to let you select a 
            dBase file from the file system to be loaded into Thuban read-only. 
            On <guibutton>OK</guibutton> the selected file is loaded and a 
            table view is opened.
            </para>
        </section>

        <section><title>Close</title>
            <para>
            The
            <menuchoice>
            <guimenu>Table</guimenu>
            <guimenuitem>Close</guimenuitem>
            </menuchoice> 
            item raises a dialog listing the currently open 
            data tables 
            (loaded via 
            <menuchoice>
            <guimenu>Table</guimenu>
            <guimenuitem>Open</guimenuitem>
            </menuchoice>). Selected tables are dereferenced on confirmation. 
            Since tables are opened read-only the contents of the tables are 
            not affected.

            Any open views of the tables are closed as well.

            Tables used in a join cannot be closed.
            </para>
        </section>

        <section><title>Rename</title>
            <para>
            <menuchoice>
            <guimenu>Table</guimenu>
            <guimenuitem>Rename</guimenuitem>
            </menuchoice> changes the table title.
            </para>
        </section>

        <section><title>Show</title>
            <para>
            The
            <menuchoice>
            <guimenu>Table</guimenu>
            <guimenuitem>Show</guimenuitem>
            </menuchoice> 
            item raises a list of available tables (explicitly 
            loaded, attribute tables, results of a join). Selected tables are 
            show in tables views on <guibutton>OK</guibutton>.
            </para>
        </section>

        <section><title>Join</title>
            <para>
            <figure>
            <title>Join Tables</title>
            <mediaobject>
            <imageobject><imagedata fileref="../images/7_2_5_join.png" format="PNG" scale="&imgscale;"/></imageobject>
            <imageobject><imagedata fileref="./images/7_2_5_join.eps" format="EPS" scale="&imgscale;"/></imageobject>
            </mediaobject>
            </figure>
            </para>
            <para>
            The 
            <menuchoice>
            <guimenu>Table</guimenu>
            <guimenuitem>Join</guimenuitem>
            </menuchoice> 
            item raises a dialog to specify the two tables to be
            joined. The join results in a new table named 'Join of "left table"
            and "right table"'.

            The dialog lets you select the two tables to be joined and the two
            fields the join has to be performed on. By default, the new
            table contains only those records which are matched by the join.

            If you want to preserve the records of the left table you can 
            perform an outer join. The fields from the right table for records 
            not matched by the join are filled with <varname>None</varname> in 
            this case.
            </para>
        </section>

    </section>
    <section><title>Attribute Tables</title>
        <para>
	    To clearly separate between both types of tables (data and 
        attribute), Thuban provides functionality regarding the attribute 
        tables under the <menuchoice><guimenu>Layer</guimenu></menuchoice> menu. 
        </para>

        <section><title>Show Table</title>
            <para>
            <menuchoice>
            <guimenu>Layer</guimenu>
            <guimenuitem>Show Table</guimenuitem>
            </menuchoice> 
            opens the attribute table of the currently active layer in a table 
            view. 

            In addition to the functionality described above selections
            affect also the map display: objects related to selected records 
            are highlighted. 
            </para>
        </section>

        <section><title>Join Table</title>
            <para>
            Unlike the join described above, the join does not result in a
            new table. The attribute table of the currently active layer is the
            left table and other tables are joined to this table. The results of
            the join are available for classification.

            As a consequence, the join cannot result in fewer
            records than the source attribute table. The user is warned if the 
            right table does not fulfill this constraint. An outer join must be
            used in such cases.
            </para>
        </section>

        <section><title>Unjoin Table</title>
            <para>
            As said above, a normal table cannot be closed while it is still 
            used in a join. While the joined table resulting from a join of 
            normal tables can be simply closed (and thereby dereferencing 
            the source tables), this is not possible for attribute tables.

            Hence joins on attribute tables must be solved explicitly. This is
            what the 
            <menuchoice>
            <guimenu>Layer</guimenu>
            <guimenuitem>Unjoin Table</guimenuitem>
            </menuchoice> 
            item is used for: The last join for the currently
            active layer is solved.
            </para>
        </section>
    </section>
  </chapter>

  <chapter><title>Extensions</title>
  	<para>
	Thuban is designed to be extensible. The term Extension is used as a
	general term for anything that extends Thuban.
	This chapter introduces into some oppportunities how to add and
	handle extra functionality developed by your own or third parties.
	</para>

	<section><title>Add personal extensions via thubanstart.py</title>
		<para>
		After Thuban has been started for the first time, a directory
		.thuban is created within your home directory.
		There you can add a file thubanstart.py  which will be imported
		by Thuban at start-up. It is recommended to add only import-statements
		to this file to keep the actual code of extensions separate.
		</para>
		<para>
		The modules to import must either be found through the environment
		variable PYTHONPATH or directly be placed into the .thuban-directory.
		</para>
		<para>
		As an example, copy the file examples/simple_extensions/hello_world.py
		of the Thuban source code into the .thuban-directory of your home
		directory. Now add add the statement import hello_world to the
		file thubanstart.py and run Thuban. You will notice an additional
		menu <menuchoice><guimenu>Extensions</guimenu></menuchoice> where
		the new item for the Hello-World extension is placed - select it
		to see the Hello-World message.
		</para>
	</section>

	<section><title>Extensions included in Thuban package</title>
		<para>
		The extensions described in this section are part of the
		Thuban package, but not activated by default.
		You will find them in the Thuban installation directory
		under <literal>Extensions/</literal>. Activate them as personal
		extensions via PYTHONPATH as described in the previous section.
		Stable extensions will appear under the menu
		<menuchoice><guimenu>Extensions</guimenu></menuchoice> and
 		extensions which are in experimental state and therefore
		not fully functional under
		<menuchoice><guimenu>Experimental</guimenu></menuchoice>.
		</para>

		<section><title>Stable extensions</title>
			<para>
			These extensions provide extra-functionality to Thuban
			that has not (yet) been integrated in the main application.
			They are considered to be free of bugs, but may be
			further polished with helpful user interactions.
			</para>
			<section><title>gns2shp</title>
				<para>
				This tool converts data of the Geospatial Names Server
				(GNS, see <ulink url="http://www.nima.mil/gns"/>)
				into Shapefile format.
				The above web-site offer to download named places
				information grouped by countries for all of the world
				except USA for which other data are provided.
				</para>
				<para>
				If you download and unpack a package, you will have
				a text-file with suffix .txt.
				Selecting such a file via gns2shp will create the
				corresponding Shapefile with the same basename and
				place it in the same direcory. Afterwards it
				is automatically loaded into Thuban.
				The Shapefile will not automatically be delete afterwards.
				</para>
				<para>
				The gns2shp.py module can also be executed on the
				command line for batch processing purposes.
				</para>
				<para>
				A sample (<literal>ls.txt</literal> for Liechtenstein)
				is included in the directory
				<literal>Extensions/gns2shp/test</literal>.
				</para>
			</section>
		</section>
		<section><title>Experimental extensions</title>
			<para>
			All all of these functions have to be handled with care,
			since they are neither complete nor well tested.
			They are to be seen as a proof-of-concept and may
			additionally in some cases of practical help.
			</para>
			<para>
			Any interest on further improvement of these extensions
			should be communicated towards the developer and user
			community.
			</para>

			<section><title>importAPR</title>
				<para>
				This command offer to load an ESRI® ArcView® project
				file (suffix .apr) and convert it for use within Thuban.
				After selecting a apr-file to load, a list
				will be presented that offers to select one of the views
				of the apr-file, provided there is more than one.
				Furthermore, the Session Info-Tree is extended with
				a complete representation of the parsed apr-file.
				</para>
				<para>
				The legend of Thuban does not yet cover all of the elements as
				supported by the legend of ArcView®. Therefore, the Thuban
				map will look different. Furthermore, the apr-format is
				a proprietary format, not openly documented.
				Therefore, the interpretation is
				partly based on reverse engeneering and good guessing.
				</para>
				<para>
				The file-paths within the apr-file may not fit and potentially
				are subject to fix in the apr-file. You can do this
				applying any text editor. The paths are either absolute
				or relative from where Thuban has been started.
				</para>
				<para>
				A sample for the Iceland data is included as
				<literal>Extensions/importAPR/samples/iceland.apr</literal>.
				The file-paths are relative from the Thuban main directory.
				</para>
			</section>
		</section>
	</section>

	<section><title>Writing simple extensions</title>
		<para>
		Writing an extension for Thuban basically means to
		implement the extra functionality in Python with all of the
		Thuban classes, methods and variables available.
		</para>
		<para>
		All classes and their methods are documented in the source code
		(see their doc-strings). Here is an example from
		Thuban/Model/layer.py that describes some of the methods
		of a Layer object:
		</para>
		<programlisting>
		<![CDATA[
class BaseLayer(TitledObject, Modifiable):

    """Base class for the layers."""

    def __init__(self, title, visible = True, projection = None):
        """Initialize the layer.

        title -- the title
        visible -- boolean. If true the layer is visible.
        """
        TitledObject.__init__(self, title)
        Modifiable.__init__(self)
        self.visible = visible
        self.projection = projection

    def Visible(self):
        """Return true if layer is visible"""
        return self.visible

    def SetVisible(self, visible):
        """Set the layer's visibility."""
        self.visible = visible
        self.issue(LAYER_VISIBILITY_CHANGED, self)

    def HasClassification(self):
        """Determine if this layer support classifications."""
...
		]]>
		</programlisting>
		<para>
		This example intends to give you an impression of the
		source-code-level documentation.
		You have to make yourself familiar with
		the Python programming language to understand some special
		code elements.
		</para>
		<section><title>hello_world.py</title>
		  <para>
		  Traditionally, the first example should welcome the world.
		  Most of the code handles the frame for integrating a menu
		  item into Thuban while the actual raising of a message
		  is done in a single line.
		  </para>
			<programlisting>
			<![CDATA[
# Copyright (C) 2003 by Intevation GmbH
# Authors:
# Jan-Oliver Wagner <jan@intevation.de>
#
# This program is free software under the GPL (>=v2)
# Read the file COPYING coming with Thuban for details.

"""
Extend Thuban with a sample Hello World to demonstrate simple
extensions.
"""

__version__ = '$Revision: 1.23 $'

# use _() already now for all strings that may later be translated
from Thuban import _

# Thuban has named commands which can be registered in the central
# instance registry.
from Thuban.UI.command import registry, Command

# The instance of the main menu of the Thuban application
# See Thuban/UI/menu.py for the API of the Menu class
from Thuban.UI.mainwindow import main_menu

def hello_world_dialog(context):
    """Just raise a simple dialog to greet the world.

    context -- The Thuban context.
    """
    context.mainwindow.RunMessageBox(_('Hello World'), _('Hello World!'))


# create a new command and register it
registry.Add(Command('hello_world', _('Hello World'), hello_world_dialog,
                     helptext = _('Welcome everyone on this planet')))

# find the extensions menu (create it anew if not found)
extensions_menu = main_menu.find_menu('extensions')
if extensions_menu is None:
    extensions_menu = main_menu.InsertMenu('extensions', _('E&xtensions'))

# finally bind the new command with an entry in the extensions menu
extensions_menu.InsertItem('hello_world')
			]]>
			</programlisting>
		</section>
		<section><title>Registering a Command</title>
		  <para>
		  Mainly, our new function has to be registered to the Thuban
		  framework in order to connect it to the menu. A registered
		  command can also be connected to e.g. a toolbar button.
		  </para>
		  <para>
		  The instances and classes for this are imported at the beginning.
		  Any code not inside a method or class is directly executed when
		  the source-code module is imported. Therefore, the second
		  part of this example consist of the plain statements to create a new
		  Command and to add it to the menu.
		  </para>
		  <para>
		  By convention, it looks for a menu registered as ``extensions'' to
		  insert the new command. If it does not exist yet, it gets created.
		  It is advisable to copy this code for any of your extensions.
		  </para>
		</section>
		<section><title>The Thuban context</title>
			<para>
			A registered command that is called, always receives the
			Thuban context. This instance provides our method with
			hook references to all important components of the Thuban
			application.
			</para>
			<para>
	        In the example hello_world.py, our function uses the
			mainwindow component which offers a method to raise a
			message dialog. In total there are three hooks:
			<itemizedlist>
			<listitem>
			<para>application:
			This object is the instance of the Thuban Application class.
			Except maybe for loading or savinf sessions, you will not
			need this object for a simple extension.
			See Thuban/UI/application.py for the API.
			</para>
			</listitem>
			<listitem>
			<para>session:
			The instance of the current session. It manages the sessions'
			map and tables. You can set and remove the map or tables.
			In may also get the map object. However, you should know that
			internally it is already prepared to handle many maps.
			Therfore, currently you would always receive a list with exactlty
			one element. In the future, if there are more than one map,
			you will not know which one is the currently display one and
			therefore you should use the mainwindow as hook to find
			the currently displayed map.
			See Thuban/Model/session.py for the API.
			</para>
			</listitem>
			<listitem>
			<para>
			mainwindow: The mainwindow object is central to manage various
			GUI things such as the Legend sub-window. Most notably,
			you get access to the canvas which is the window part where
			the map is drawn. The canvas knows, which map it currently
			draws and therefore you get the current map via
			context.mainwindow.canvas.Map().
			See Thuban/UI/mainwindow.py for the API.
			</para>
			</listitem>
			</itemizedlist>
            </para>
		</section>
	</section>
  </chapter>

  <chapter><title>Trouble Shooting</title>
    <para>
    Here are a few problems that users have encountered when first using Thuban.
    </para>
    <para>

    <itemizedlist>
    <listitem>
    <para>After adding two or more layers nothing is drawn in the map window.
    </para>
    <para>
    This is probably because the layers have different projections. Projections
    must be set on all layers and on the map itself if the layers' projections
    are different.
    </para>
    </listitem>

    <listitem>
    <para>Thuban crashes on startup with the error 
        <literal>NameError: global name 'False' is not defined</literal>.
    </para>
    <para>
    <varname>True</varname> and <varname>False</varname> were only introduced
    in Python 2.2.1. Thuban depends on at least Python 2.2.1.
    </para>
    </listitem>

    <listitem>
    <para>After compiling Thuban, Thuban crashes with an error similar to
        <literal>
        ImportError: /usr/local//lib/thuban/Thuban/../Lib/wxproj.so: undefined symbol: __gxx_personality_v0
        </literal>
    </para>
    <para>
    Thuban depends on the wxWindows library. If Thuban is compiled with an
    incompatible version of the compiler than wxWindows was compiled with
    this error may occur. Try compiling with a different version of the 
    compiler.
    </para>
    </listitem>
    </itemizedlist>
    </para>
    <para>
    If an error occurs Thuban will display a dialog indicating the error
    before closing. The text should be copied and reported to the 
    <ulink url="http://thuban.intevation.org/bugtracker.html">
    Intevation bugtracker
    </ulink>.
    More information about the system is available from 
    <menuchoice><guimenu>Help</guimenu><guimenuitem>About</guimenuitem></menuchoice> box.
    This should also be included in the bug report.
    <figure>
    <title>Error Dialog</title>
    <mediaobject>
    <imageobject><imagedata fileref="../images/8_int_error.png" format="PNG" scale="&imgscale;"/></imageobject>
    <imageobject><imagedata fileref="./images/8_int_error.eps" format="EPS" scale="&imgscale;"/></imageobject>
    </mediaobject>
    </figure>
    </para>

  </chapter>

  <appendix><title>Supported Data Sources</title>
    <para>
    </para>
    <variablelist>
    <varlistentry>
    <term>Shapefile</term>
    <listitem>
        <para>
        The Shapefile format has become a standard format for saving
        geographic vector information. It supports polygons, lines, and
        points. 
        
        <ulink url="http://www.esri.com/library/whitepapers/pdfs/shapefile.pdf">
        Technical Specification.
        </ulink>  
        </para>
    </listitem>
    </varlistentry>

    <varlistentry>
    <term>dBase file</term>
    <listitem>
        <para>
        dBase files are used to store the attributes for each layer. This
        is closely associated with the Shapefile format. For detailed 
        specifications on the correct format of a dBase file used with
        Thuban please see the Technical Specification for the Shapefile
        format above.
        </para>
    </listitem>
    </varlistentry>

    <varlistentry>
    <term>PostGIS</term>
    <listitem>
        <para>
        PostGIS adds support for geographic objects to the PostgreSQL 
	object-relational database. Different layer types (as for Shapefiles)
	are supported. <ulink url="http://postgis.refractions.net">PostGIS
	Homepage</ulink>
        </para>
    </listitem>
    </varlistentry>

    <varlistentry>
    <term>Raster files</term>
    <listitem>
        <para>
	Binding the GDAL library Thuban supports numerous raster file formats,
	see <ulink url="http://www.remotesensing.org/gdal/formats_list.html">
	GDAL format list</ulink> for details.</para>

	<para>Most commonly used is the <emphasis>TIFF/GeoTIFF</emphasis>
	format: Raster maps are provided as TIFF images, with an additional 
	"world file" storing the geographic reference (usually with an
	extension ".tfw").
        </para>
    </listitem>
    </varlistentry>

    </variablelist>
  </appendix>

  <appendix><title>Working with PostGIS</title>
  <para>
  This section focusses on the use of PostGIS in the Thuban framework. For
  installation and maintenance of spatial databases we refer to the  
  <ulink url="http://postgis.refractions.net">PostGIS Homepage</ulink>.
  The Thuban PostGIS support requires the 
  <ulink url="http://initd.org/software/psycopg">psycopg module</ulink>.
  </para>

  <para>
	Working with PostGIS Databases is seperated into two steps:
	<itemizedlist>
	<listitem><para>Opening a Database Connection</para></listitem>
	<listitem><para>Loading a Data Layer</para></listitem>
	</itemizedlist>
  </para>
	<section><title>Opening a Database Connection</title>
	<para>
		Before a data layer can be loaded from a PostGIS database a
		connection with the database has to be established. 
		<menuchoice>
        	<guimenu>Session</guimenu>
        	<guimenuitem>Database Connections ...</guimenuitem>
        	</menuchoice> opens a dialog for database connection
		management. In the dialog new connections can be added 
		and existing ones can be removed. Removing a database
		connection is not possible if the map still displays a
		layer provided by this database connection. 
	</para>
    <figure>
    <title>Database Management Dialog</title>
    <mediaobject>
    <imageobject><imagedata fileref="./images/app_postgis_db_management.png" format="PNG" scale="&imgscale;"/></imageobject>
    <imageobject><imagedata fileref="./images/app_postgis_db_management.eps" format="EPS" scale="&imgscale;"/></imageobject>
    </mediaobject>
    </figure>

	<para>
		To add a new database connection to the session a dialog is
		opened to specify the relevant connection data. Enter all 
		data relevant for your connection. If the connection fails 
		the dialog remains open and provides some hints on the failure.
	</para>
        <figure>
    	<title>Add Database Dialog</title>
    	<mediaobject>
    	<imageobject><imagedata fileref="./images/app_postgis_db_add.png" format="PNG" scale="&imgscale;"/></imageobject>
    	<imageobject><imagedata fileref="./images/app_postgis_db_add.eps" format="EPS" scale="&imgscale;"/></imageobject>
    	</mediaobject>
    	</figure>
	
	<para>
	It is important to note that information on database connections are
	also stored with the session. Passwords are NOT stored. If you load a 
	session with database connections you are asked to enter these
	passwords again where required.
	</para>

	</section>

	<section><title>Loading a Data Layer</title>
	<para>
	Data layers as part of a map are loaded with the 
	<menuchoice>
        <guimenu>Map</guimenu>
        <guimenuitem>Add Database Layer ...</guimenuitem>
        </menuchoice> menu item. A dialog is raised displaying two choice
	lists. In the left list all connected databases are shown.
	Highlighting
	one of these and issuing a retrieval results in a list of available 
	layer tables from that database. After selection of a 
	layer the dialog is closed.
	</para>
        <figure>
    	<title>Add Database Dialog</title>
    	<mediaobject>
    	<imageobject><imagedata fileref="./images/app_postgis_add_layer.png" format="PNG" scale="&imgscale;"/></imageobject>
    	<imageobject><imagedata fileref="./images/app_postgis_add_layer.eps" format="EPS" scale="&imgscale;"/></imageobject>
    	</mediaobject>
    	</figure>
	
	</section>

  </appendix>

  <appendix><title>Supported Projections</title>
    <para>
    The following types of projections are directly support by 
    Thuban. The specific values for each are provided by the user
    to create custom projections. Thuban comes with predefined
    projections which are available through the Projections dialog.
    </para>
    <itemizedlist>
    <listitem>
    	<para>Geographic</para>
	<itemizedlist>
    	<listitem><para><literal>Ellipsoid</literal></para></listitem>
    	<listitem><para>
		<literal>Source Data</literal>: either Degrees or Radians
		</para></listitem>
    	</itemizedlist>
    </listitem>
    <listitem>
    	<para>Lambert Conic Conformal</para>
    <itemizedlist>
    	<listitem><para><literal>Ellipsoid</literal></para></listitem>
    	<listitem><para><literal>Latitude of 1st standard parallel</literal></para></listitem>
    	<listitem><para><literal>Latitude of 2nd standard parallel</literal></para></listitem>
    	<listitem><para><literal>Central Meridian</literal></para></listitem>
    	<listitem><para><literal>Latitude of Origin</literal></para></listitem>
    	<listitem><para><literal>False Easting</literal> (meters)</para></listitem>
    	<listitem><para><literal>False Northing</literal> (meters)</para></listitem>
    </itemizedlist>
    </listitem>
    <listitem>
    	<para>Transverse Mercator</para>
    <itemizedlist>
    	<listitem><para><literal>Ellipsoid</literal></para></listitem>
    	<listitem><para><literal>Latitude</literal>of origin</para></listitem>
    	<listitem><para><literal>Longitude</literal>at central meridian</para></listitem>
    	<listitem><para><literal>Scale Factor</literal>at central meridian</para></listitem>
    	<listitem><para><literal>False Easting</literal> (meters)</para></listitem>
    	<listitem><para><literal>False Northing</literal> (meters)</para></listitem>
    </itemizedlist>
    </listitem>
    <listitem>
    	<para>Universal Transverse Mercator</para>
    <itemizedlist>
    	<listitem><para><literal>Ellipsoid</literal></para></listitem>
    	<listitem><para><literal>Zone</literal> 
		(can be guessed appling the Propose button)</para></listitem>
    	<listitem><para><literal>Southern Hemisphere</literal> flag</para></listitem>
    </itemizedlist>
    </listitem>
    </itemizedlist>
    
    <para>
    Thuban comes with a sample set of map projections for various 
    European countries. Apart from the basic projection they differ 
    especially in their parameterization:
    </para>
    <itemizedlist>
    <listitem><para>Belgium Datum 1972 (Lambert Conic Conformal)</para>
    </listitem>
 
    <listitem><para>Gauss-Boaga Zone 1 (Italy, Transverse Mercartor)</para>
    </listitem>
 
    <listitem><para>Gauss-Krueger Zone 2 (Germany, Transverse Mercartor)
    </para>
    </listitem>
 
    <listitem><para>Reseau Geodesique Francaise 
    (France, Lambert Conic Conformal)</para>
    </listitem>
 
    <listitem><para>UK National Grid (United Kingdom, Transverse Mercartor)
    </para>
    </listitem>
    </itemizedlist>

    <para>
    Thuban uses the comprehensive PROJ library for projections. PROJ provides
    more than the four commonly used projections described above. If needed
    Thuban can be easily extended to a new projection covered by PROJ.
    </para>
  </appendix>

</book>

